SPECIFICATION
INSTALLATION INSTRUCTIONS
Note
Note
PROD. CODE
SIZE
AGE RANGE
F/ FALL HEIGHT
HEAVIEST PART
TOTAL WEIGHT
Fitness Legacy Zone
6210-059
14 to Adult
<600mm
Approx 266Kg
Approx 311Kg
6210-059
Page 1 of 15
1135x2260x2400mm
Ensure all installation aids are removed before first use.
Polyester powder paint to EN 13438:2005
Standard fixings to BS 3692:2001 and
BS 4190:2001
Non-standard fixings are anti-vandal and
corrosion resistant
Inc Chest Press & Inc Pull Down
Use Installation Aid (3720-184) for Below Ground Fixing.
1 Read installation instructions thoroughly before commencing installation of unit.
2 Excavate one hole 1300 x 1000 x 600 deep - see page 2.
3 Position and assemble the below ground fixing with spragging irons (see page 2) centrally in the
excavated hole so the eight bolts are pointing upwards ensuring that the top plate is flush with the
finished surface level.
4 Check alignment of bolts and backfill the holes with concrete (0.76 cu Metres) (4 parts gravel, 2 parts
sand & 1 part cement) ensuring the below ground fixing is perpendicular to the finished surface level.
5 Allow the concrete to set for 48 hours.
6 Position the unit on the below ground fixings and fit using one M20 washer, one M20 spring washer
and one M20 nut per bolt as shown on page 3. Ensure unit is perpendicular to the ground surface.
Ensure all moving parts move freely without obstruction. Centre punch thread in two places on all
eight M20 Bolts and then fit nut cap (see page 3).
Steel plate to EN 10025
Steel CHS to EN 10219
Steel RHS to EN 10219
Welding to EN ISO 14341:2011
