background image

Page 4 

INDURO 145 OWNERS MANUAL 

2. RECEIVING 

Check  the  equipment  received  against  the  shipping  invoice  to  make  sure  the 

shipment  is  complete  and  undamaged.  If  any  damage  has  occurred  in  transit,  please 
immediately notify your supplier. 

 

The INDURO 145 package contains: 

§ 

Induro 145 Inverter Power Source 

§ 

 (This) Owners Manual 

 

Optional additional items for Induro 145: 

Arc Lead Kit - 3m ............................................................................ AA58-0/3 

Includes: 

• 

3 metre welding lead with electrode holder 

• 

3 metre work lead with clamp 

 

TIG + Arc Lead Kit .......................................................................... AA59-0/3 

Includes: 

• 

3 metre welding lead with electrode holder 

• 

3 metre work lead with clamp 

• 

3m TIG torch with starter kit & adaptor 

• 

argon flow gauge regulator 

 

 

3. SPECIFICATIONS 

Primary Voltage........................................ 240 Volts AC, +/- 10%, 50/60 Hz 

Maximum Primary Demand.............................................................. 28 Amp 

Rated Input Current.......................................................................16.5 Amp  

Welding Current Range .......................................................... 5 - 145 Amps 

Duty Cycle.......................................... 145 Amps @ 25.8v, 35% Duty Cycle 

Open Circuit Voltage ................................................................. 57 Volts DC 

......................................................................with VRD operated – 11.2v dc 

Mass ..................................................................................................4.8 Kg 

 

This power source comes with a 15 amp plug fitted and the unit must be connected 

to a 15 amp mains power outlet. 

IMPORTANT NOTICE 

WARRANTY MAY BE VOIDED IF EQUIPMENT IS POWERED FROM AN 

UNSUITABLE ENGINE DRIVEN GENERATOR. 

Any generator used to power this equipment must have a minimum capacity of 6,000 

watts continuous and must incorporate output voltage regulation.  

Generators without voltage regulation must have a capacity of at least 16,000 watts.  

Summary of Contents for INDURO 145


















Reviews: