9
8
Fig 1 Power Source Controls
1 Ammeter
This meter displays actual welding current
during welding operation, and a stored
reading for 30 seconds after welding.
Weldmatic 396 Only.
2 Voltmeter
This meter displays actual welding voltage
during welding operation, and a stored
reading for 30 seconds after welding.
Weldmatic 396 Only.
4 POWER SOURCE CONTROLS
3 Coarse Voltage, On/Off Control
This switch provides mains power ON/
OFF and Coarse adjustment of the output
welding voltage over three ranges.
4 Fine Voltage Control
This switch provides Fine adjustment of the
output welding voltage over ten steps.
2
1
3
4
