5.
Fit your phone to the bottom
of the Samrtphone holder portion
of the Smartphone mounting adapter
6.
Start by extending the top part of
the Smartphone holder portion
and then fitting your phone in
between the bottom and the top
of the Smartphone mounting adapter.
7.
Locate the Gray 1/8” to 1/8” Smart
Device cable and Insert the Gray
1/8” TRS end of the cable into the
Wi Receiver audio output jack.
8.
Route the cable beneath the belt
clip as shown to keep the cable
clear from the camera lens vision field.
Note: Remove your phone covers especially
if you are using a large phone or your phone
might not fit perfectly in the phone holder.
SMARTPHONE CONNECTION
Smartphone Connection
The Wi Receiver is designed to mount
almost any Smartphone using the
Smartphone adapter.
1.
Locate the Smartphone adapter
and the 1/4”-20 adapter
2.
Fasten the 1/4”-20 adapter to the
mounting screw on the Smartphone
adapter 1/4”-20 nut and tighten the
bottom lock ring.
3.
Fasten the 1/4”-20 adapter
mounting screw to the Receiver
belt clip 1/4”-20 nut
4.
Tighten the top lock ring.
j
k
l
m
22
