Audio Cable Connection
1.
Locate the 1/8” to 1/8” TRS stereo audio cable or
the 1/8” to XLR TRS audio cable. Use the 1/8”
TRS to XLR audio cable if your camera is
equipped with XLR audio input ports.
2.
Insert the 1/8” TRS stereo end of the audio cable
into the Wi Receiver audio output jack.
3.
Insert the 1/8” TRS stereo end or the XLR end of
the audio cable into the Camera MIC-IN or Line-In
audio input jack.
For best audio results we recommend connecting
to the Line-In input if available.
Camera Connection
The Wi Transmitter and Receiver are designed
to mount video camera DSLR and handheld
recorders.
1.
Locate the 1/4”-20 Hot Shoe flash adapter
for cameras, tripods and bipods.
2.
Fasten the 1/4”-20 Hot Shoe flash adapter
mounting screw to the belt clip 1/4”-20 nut
and tighten the top lock ring.
3.
Loosen the bottom lock ring on the 1/4”-20
Hot Shoe flash adapter camera accessory.
4.
Insert/slide the mounting foot of 1/4”-20 Hot
Shoe flash adapter into the camera accessory
shoe and tighten the bottom lock ring.
To emulate direct lavalier connection setting for your
camera, change the Transmitter mode setting to Line-in
mode.
5
d
CAMERA CONNECTION
20
F
