Wi AudioStream EL2
28
PAIRING
Pairing the Wi AudioStream EL2
Before using the Wi AudioStream EL2, you will need to pair the Transmitter with the
Receiver. Pairing will allow a connection between the Transmitter and the Receiver.
1.
First turn ON the Transmitter (Tx) and the Receiver (Rx) by pressing and
holding the POWER button , on each of the units for 2 seconds.
2.
Press and hold the LINK button on the Transmitter (Tx) for 3 seconds.
The Power/Status green LED on the Transmitter will start
fl
ashing.
The Transmitter is now in a Pairing mode and ready to search for receivers.
3.
Press and hold the LINK button on the Receiver (Rx) for 3 seconds.
The Power/Status green LED on the receiver will
fl
ash momentarily.
4.
Once the Transmitter pairs with Receiver, the Power/Status LED on both
devices will turn to solid green.
5.
The Wi AudioStream EL2 Transmitter and Receiver are now ready for use.
(Tx)
(Rx)
