Page 1: ......
Page 2: ...cted If the ULM200M wireless microphone cannot connect to a receiver the microphone will automatically power down after 10 seconds 3 Once connected the ULM200M microphone will be set at a medium volume Use the and buttons to adjust the volume 4 A long press of the button will put the ULM200M microphone into mute The mute condition is indicated by rapid fl ashing of the LED If the user does not unm...
Page 3: ...24 bit Encoding 232 kbps SLAC Slightly Lossy Audio Codec Latency 14 5 ms RF frequency 2 4 GHz ISM band 2406 MHz 2474 MHz 18 channels Power Supply current 70 mA 5 VDC Battery type 2 x AA LR6 Alkaline cells Battery life 30 hours Dimensions W x D x H 45 7 x 45 7 x 243 8 mm 1 8 x 1 8 x 9 6 Weight 0 4 kg 0 9 lbs Achievable range will be dependent on nearby sources of RF interference and or line of sigh...
Page 4: ...s Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit diff erent from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC rules Operation is subject to the following two conditions 1 this device may no...
