TECHNICAL DESCRIPTION
WT91-10
Whyte Series 9 Taps are DC passing on all IF Trunk Lines. The HL and HH
Tap Lines are DC passing while the VL, VH and Terrestrial Tap Lines are
isolated. An 18V DC input is provided to inject DC on the HL and HH Trunk
and Tap lines upwards and downwards.
A Green LED indicates the presence of power on the HL and HH trunk lines.
Whyte Series 9 Taps, Splitters and Multiswitches can be used to configure small
to large 9 wire Integrated Reception Systems (IRS) to suit your application.
WS92-05
The Whyte™ Series 9 Splitter is DC passing through all SAT Inputs and Outputs.
Whilst the WS92-05 Splitter does not require power to function (passive
device), it has an Auxiliary 18V Input, which enables a Whyte™ Power Supply
Unit to be connected thus serving as a convenient DC injector.
The Auxiliary Input injects 18V DC on to the HH and HL trunk lines upwards
and downwards.
A Green LED indicates the presence of power on the HL and HH Trunk Lines.
The Whyte™ Series 9 range is compact due to the zig-zag layout of the Input
and Output Terminals.
Therefore, an F Connector Tool (F Connector Screwdriver) should be used to
connect the input and output cables. Do not over tighten the F connectors
(finger tight only).
Each Series 9 Splitter comes complete with 9 F Type Couplers to enable quick
and easy interconnection to Series 9 Multiswitches and Amplifiers.
5