Whyte MTB Hardtail Series, Supplementary Service Manual, Page: 5 / 12

2019 Edition 1 Page 5
WHYTE Service Manual
3.0: PREPARATIONS FOR RIDING
3.1: MAKING ADJUSTMENTS
Please refer to the specific component manufac-
turers manual or published technical information
about adjusting the components on your Whyte
bike. Instructions may be downloaded from the
relevant manufacturer’s internet site, as shown in
the table to the right.
CAUTION!
If you are uncertain in any
way, about making adjustments to any
components on you Whyte bike, then
DO
NOT RIDE YOUR BIKE . Contact your
Whyte dealer who will be able to advise
you on how to go about setting up you
Whyte for riding, and or making adjust-
ments to the components fitted to your
bike.
3.2: WHYTE GETTA-GRIP SEAT CLAMP ADJUSTMENT
The Getta Grip seat clamp design is a patented design which allows adjustment of the sad-
dle height by the use of a Quick Release (QR) Lever.
DT Swiss www.dtswiss.com
FSA www.fullspeedahead.com
Formula www.formulahubs.com
Fox www.ridefix.com
Hope
www.hopetech.com
Jalco www.maddux-wheels.com
KS www.kssuspension.com
Maxxis www.maxxis.com
Race Face www.raceface.com
Shimano
www.shimano.com
SR Suntour www.srsuntour-cycling.com
SRAM www.sram.com
Trans – X www. tranzx.com
VP www.vpcomponents.com
WTB www.wtb.com
Item Description
1 Whyte Seat Clamp Band
2
Metal Shim
3 Whyte QR Lever
4
T-Pad
5
QR Lever Cam
6 QR M5 Adjuster Bolt
7
Whyte Main Frame
Fig.1: Getta-Grip Seat Clamp: QR Lever