Whyte MTB Hardtail Series, Supplementary Service Manual, Page: 11 / 12

2019 Edition 1 Page 11
WHYTE Service Manual
curved edges are not engaging properly, so re-align as necessary to make sure
both of the Sleeves (2 & 4) are nearly flush to the side of the Main Frame (5).
Then follow the instructions in section 3.3 to set the height and direction of the Seat Post (not
shown).
7.0: TORQUE SETTINGS
Torque explained: If no suitable Torque Wrench is available a Torque of 5 lbf.ft can be ob-
tained by applying a force of 5lb, with a Spring Balance, to the end of a spanner, 1 Foot in
length.
IMPORTANT: For all other torque settings, refer to the specific manufacturers information
bundled with this manual, or alternatively, refer to the specific manufacturers website for fur-
ther information.
8.0: OWNER’S NOTES
Description Torque (Nm) Torque (lbf.ft)
Getta Grip
M4 Grub-screw 1.9 (Min) - 2.1 (Max) 1.4 (Min) - 1.55 (Max)
Inter-Grip
M6 Cap Screw
12 (Min) - 14 (Max) 8.9 (Min) - 10.3 (Max)