CASCADE MODE
Multiple Whyte Series DRP WSCR504RP Multiswitches can be connected in
cascade as each subscriber is providing power to their port on the Multiswitch.
The system can be further extended with series 5 Legacy Multiswitches.
Please note: Legacy Whyte Series 5 Multiswitches are not configure for
remote power and will require a PSU.
When used with the WPSU-SAP1/SAP2 Smart Apartment PSU’s from Whyte,
customer support is reduced and customer satisfaction is increased as the IRS
system will function correctly irrespective of building occupancy or type of
set-top-box (if any) used by the resident.
Always terminate the SAT/TERR Trunk Outputs of the last Multiswitch in a
cascade using 75Ω DC Blocked F-Type Terminators.
QUATTRO/WIDEBAND LNB SWITCH
The Series D range is compatible with both Quattro and Wideband LNB’s.
To enable compatibility with a Quattro LNB (5 Wire Trunk) place the switch
in the position marked “Q”. To enable compatibility with a Wideband LNB (3
Wire Trunk) place the switch in the position marked “WB”. Note: when using
wideband mode ensure that any amplifiers, taps or splitters that form part of
a system are wideband compatible.
2 SAT RECEPTION
The reception of two satellites can be achieved via a 5 wire trunk by utilising
2 Wideband LNB’s. The required satellite can then be selected by the STB
using simple diseqc Satellite A and B commands.
7