www.whytetechnologies.com
8
EARTH BONDING
Earth bond the Multiswitch to the Earth Bonding Lug using minimum 4mm²
Earth Bonding Cable. Make sure that the Earth Bonding Cable is connected
directly to the building’s PME (Protective Multiple Earthing) point.
CONNECTING THE POWER SUPPLY UNIT (PSU)
The PSU must be fixed to the relevant wall surface using the appropriate fixings.
Connect the DC F-type lead to the 18V DC Input of the Multiswitch.
Once all connections have been made, connect the plug to a 240V socket to
power up the Multiswitch. If a local mains supply is not available such as in
lofts and outdoor cabinets, the Power Supply Unit may be conveniently fitted
elsewhere whereby the 18V DC F-Type lead may be extended using coaxial
cable.
Connecting the Subscriber Cables
Terminate the Subscriber Cables with good quality F Connectors and connect to the Subscriber
Outputs. The F Connectors should be fitted to the coaxial cable correctly, ensuring that the centre
core protrudes 3mm above the F Connector body.
See figure 3.
Ensure that you do not exceed the
bending radius of the Coaxial Cable being used. The Subscriber Cables may be arranged either
side of the Multiswitch before being terminated and connected. If required, the Subscriber Cables
may be arranged to one side of the Multiswitch, with the cables passing under the Multiswitch before
being terminated and connected to the Subscriber Outputs on the opposite side.
See figure 4.
Always use CAI approved high quality coaxial cable.
Connecting the Power Supply Unit (PSU)
The PSU must be fixed to the relevant wall surface using the appropriate fixings. Connect the DC F-
type lead to the 18V DC Input of the Multiswitch.
Once all connections have been made, connect the plug to a 240V socket to power up the
Multiswitch. If a local mains supply is not available such as in lofts and outdoor cabinets, the Power
Supply Unit may be conveniently fitted elsewhere whereby the 18V DC F-Type lead may be extended
using coaxial cable.
5
Whyte
Earth Bonding
Earth bond the Multiswitch to the Earth Bonding Lug using minimum 4mm² Earth Bonding Cable.
Make sure that the Earth Bonding Cable is connected directly to the building’s PME (Protective
Multiple Earthing) point.
Figure 3
3mm
Figure 4
Summary of Contents for 5 Lite Series
Page 11: ...www whytetechnologies com 11 ...
