![background image](http://html.mh-extra.com/html/whyte/19-c/19-c_service-manual_978494005.webp)
2010 Edition 1
Page 16
6.0: TORQUE SETTINGS
Torque explained: If no suitable Torque Wrench is available a Torque of 5 lbf.ft can be obtained by ap-
plying a force of 5lb, with a Spring Balance, to the end of a spanner, 1 Foot in length.
IMPORTANT:
For all other torque settings, refer to the specific manufacturers information
bundled with this manual, or alternatively, refer to the specific manufacturers website for
further information.
7.0: NOTES
WHYTE Service Manual
Whyte 19 Dropout System
Nm
lbs.ft
M6 x 14mm Pivot Screw
13 - 15
9.5 - 11
M6 x 16mm Clamping Screws
13 - 15
9.5 - 11
2010 Edition 1
Page 5
WHYTE Service Manual
2.0: GEOMETRY
Frame Size
Small
Medium
Large
Head Angle
67.7 - 68.2°
67.7 - 68.2°
67.7 - 68.2°
Seat Angle
72.2 - 72.7°
72.2 - 72.7°
72.2 - 72.7°
Top Tube
565.1mm
584.5mm
609.6mm
BB Height*
319.7mm - 325.7mm
319.7mm - 325.7mm
319.7mm - 325.7mm
Stand Over
775mm
797mm
823mm
Wheel Base
1065.3mm - 1082.5mm
1085.2mm - 1102.4mm 1111.1mm - 1128.3mm
Chain Stay
415mm - 435mm
415mm - 435mm
415mm - 435mm
Seat Post
30.9mm
30.9mm
30.9mm
X
A
B
C
D
E
F
G
H
2.1: WHYTE 19 TRAIL, TI & STEEL
Note:
Geometry shown here is ’Showroom’ i.e. without rider aboard the bicycle. ’With Sag’ geometry is with rider after correct
sag is set at the front. Please refer to suspension set up for information on how to achieve the correct sag of the fork.
* BB height with Ø677mm tyres fitted (2.25” / 54-559)
Fig.1:
Geometry