background image

Appliance Safety 

 

Your safety and the safety of others are very important to us. 

 
 

 
 
 
 

 

 

Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, 
and do not use an extension cord. 

 

Do not use if the power supply cord is damaged. If damaged, it must be replaced by a 
qualified electrician. 

 

It is recommended that a separate circuit, serving only your appliance be provided. Use 
receptacles that cannot be turned off by a switch or pull chain. 

 

Never clean appliance parts with flammable fluids or harsh chemicals. These fumes can 
create a fire hazard or explosion. 

 

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of the 
appliance or any other appliance.  

 

Before proceeding with cleaning and maintenance operations, make sure to unplug the 
appliance. 

 

Do not connect or disconnect the electric plug with wet hands. 

 

Do not attempt to repair or replace any part of your appliance unless it is specifically 
recommended in this manual. All other servicing should be referred to a qualified technician. 

 
 
 
 

FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL 

 

Make sure all Ventilation Openings (B) have a minimum clearance of 10” (25cm.) from 
surrounding walls and other appliances. Choose a well-ventilated area with temperatures 
above 60°F (16°C) and below 90°F (32°C). This appliance must be installed in an area 
protected from the element, such as wind, rain, water spray or drips. 

 

The appliance should not be located next to ovens, grills or other sources of high heat. 

 

It is important for the appliance to be leveled in order to work properly. For a stable 
installation, make sure the appliance is placed on a flat, level and solid surface.

 

 

 

Ensure that the surface on which the appliance is placed is strong enough to hold the 
appliance. 

 

This appliance is not intended for use by young children or physically-challenged persons 
without supervision/assistance. Young children must be supervised to ensure safety around 
this or any appliance.  

 

 

Do not use solvent-based cleaning agents of abrasives on the interior. These cleaners may 
damage or discolor the interior. 

 

The appliance is an electrical appliance. To avoid injury from electrical shock do not operate 
the appliance with wet hands, while standing on a wet surface or while standing in water. Do 
not use outdoors or in wet conditions. 

 

When positioning or moving the appliance ensure that it is not turned upside down or greater 
than 45° or more off level.  

 

Never pull the cord to disconnect it from the outlet. Grasp the plug and pull it from the outlet. 

 

Never lift, carry or drag the appliance by the power cord. 

 

This appliance is designed for household, non-commercial use only. Any other use will void 
the warranty. 

To reduce the risk of fire, electrical shock, or injury when using your appliance, follow 
these basic precautions 

Summary of Contents for T-2C/A














Reviews: