After finishing the timer setup, press the “MODE” button to start the countdown.
After finishing the countdown, “00.00” will appear on the LCD display and alarm will
sound.
Press the “MODE” button to stop the alarm. Then press the “MODE” button again to
switch back to clock mode.
If there is no operation in 60 seconds, the system will return to clock mode.
UNIT EXCHANGE
Press the “UNIT” button to switch from “g” gram to “oz” ounce.
OVER LOAD INDICATOR
When the scale is over loaded, “Err” will appear on the display.
ADVICE FOR USE AND CARE
1. Placing the scale on a hard and flat surface to ensure reliability and accuracy in
weighing.
2. Clean the scales with a damp cloth. Do not allow water to enter the unit.
3. Do not use chemical abrasive cleaners.
4. Do not drop or subject the scale to shock as this may damage the unit.
5. Do not expose the scale under direct sunlight.
6. Remove the battery if the scale is not in used for a long period of time.
7.
Not for commercial use.
