background image

Installation and Operation 

START / PAUSE Button

After desired operating time is set, press the START/PAUSE button

          

 to initiate operation. The LCD will

display

 

the operation icon corresponding to the operation mode chosen

The unit can be paused by pressing

the

 

START/PAUSE again. At pause, press START/PAUSE button and the machine will resume its unfinished

operation.

NOTE: The unit may enter a three minute compressor lockout when operation of the unit has been resumed.
This three minute time delay helps extend the life of the compressor. During the compressor lockout, only the
Mixing only icon will be displayed. Once delay elapses, the compressor will engage, ice cream icon will be
displayed, and the ice cream maker will start cooling again.

ICE CREAM MAKING

 

WARNING: Before first use, wipe the base of the unit with a moist cloth. Do not immerse the base in water. Wash 
the lid, removable mixing bowl and churn blade in warm, soapy water to remove any dust or residue from the 
manufacturing and shipping process. Please note that the parts are not dishwasher safe. Do not clean any of the 
parts with abrasive cleaners or hard implements.  

OPERATING INSTRUCTIONS 

1.

Plug the unit into the power outlet. LCD screen will display “00” for
standby.

2.

Prepare ingredients (see pages 11 - 12 of the User Manual for
recipes).

Note: Please make sure that the pre-mixture does not exceed the
top dasher of the churn blade to avoid overflowing. See 2.a

3.

Place removable mixing bowl into the base. Be sure bowl is properly aligned. Make sure the outside of the
mixing bowl is completely dry before inserting it into the appliance.

4.

Place churn blade in the removable mixing bowl so that it rests in the center of the bowl.

5.

Pour mixture into the removable mixing bowl. When mixture is ready, position the transparent lid and lock
into place by turning it counterclockwise.

6.

Press the POWER button to turn the unit on.

7.

The timer will default to 60:00 minutes. Timer can be adjusted by pressing the timer button

8.

Press the START/PAUSE button to begin. The timer will count down to 00:00 and the unit will

 go into

Standby mode.

Tip: Additional ingredients such as nuts and fruits can be added towards the end of mixing time. Once the
mixture has begun to thicken (usually about 5 minutes from end time), add the ingredients

.

9.

Turn the unit off by pressing the POWER button. Remove the transparent lid by turning it clockwise to un-
lock. Lift removable mixing bowl out of the base with handle. Remove churn blade from removable mixing
bowl.

NOTE: 

If the unit is not powered off and removable mixing bowl is not removed from the unit after the

operation time, it will go int

o Standby mode

.

Cooling

 Only

 Function

When the set operation time has elapsed (LCD displays "00:00"), the operation stops and the 

appliance will automatically enter into the Cooling Only Function to keep the ice cream cool. In this function, 

the compressor will come on for 20 minutes. When elapsed, the unit will go into Standby mode. 

2.a

Summary of Contents for ICM-128WS















Reviews: