7
•
IMPORTANT: Do not kink or pinch the power supply cord between the upright freezer and a
wall or cabinet.
Leveling the upright freezer
It is important for the upright freezer to be leveled in order to
work properly. It can be raised or lowered by turning the two
feet on the bottom of the machine. If the upright freezer is not
leveled during installation, the doors may not close or seal
properly; causing cooling, frost, or moisture problems. It is
very important that the upright freezer is level in order to
function properly.
Note:
The leveling foot under the door hinge is smaller than
the other leveling foot.
We
recommend using a carpenter’s level to check the
machine.
1. Place a carpenter’s level on top of the product to see if the
upright freezer is level from front to back and side to side.
2. Adjust the height of the feet as follows:
•
Turn the leveling feet to the right to lower that side of
the upright freezer
•
Turn the leveling feet to the left to raise that side of
the upright freezer.
Reversing the Door Swing
Tools needed: Flathead screwdriver, Phillips screwdriver
Note: To avoid injury to yourself and property, we recommend someone assist you during the door
reversal process
This appliance has the capability of the door opening from either the left or right side. Please ensure the
appliance is unplugged and empty.
To take the door off, it is necessary to tilt the appliance backward. You should rest the appliance on
something solid (e.g. chair) just below the top panel so you can access the bottom of the upright freezer.
DO NOT lay the appliance completely flat as this may damage the coolant system.
1
．
Start by removing the bottom hinge from
the bottom of the freezer. Unscrew the two
screws from the bottom hinge. Remove the
foot from opposite side. Slide the door down,
away from the hinge pin located on the top of
the door.
