9
Operation and Controls
It is recommended you install the appliance in a place where the ambient temperature is between 72º- 78ºF / 23º-
26ºC. If the ambient temperature is above or below recommended temperatures, the performance of the beverage
refrigerator
may be affected. For example, placing your appliance in extreme cold or hot conditions may cause inte-
rior temperatures to fluctuate.
NOTE:
When using the beverage refrigerator for the first time or restarting after being shut off for a long period of time,
there may be a few degrees variance between the set temperature and the LED readout. This is normal due the
length of activation time. The unit should return to normal after running for a few hours.
CONTROL PANEL GUIDE
Fig, 1
POWER
To turn the appliance on/off, press and hold the power key for 5 seconds.
UP
To increase (warm) the set temperature by 1°C or 1ºF.
DOWN
To decrease (cool) the set temperature by 1°C or 1ºF.
INTERIOR CABINET LIGHT
Used to turn the internal light on/off.
Fig. 2
SUPERLIT LIGHT STRIP SWITCH
Used to turn the superlit light strip on/off.
SUPERLIT LIGHTING
This beverage refrigerator is equipped with superlit door lighting strip along the door frame that illuminates a
bright interior light setup throughout the refrigerator cabinet and provides an attractively dramatic effect for your
living room or entertainment area.
NOTE:
If the interior cabinet light and door light switch are turned off, opening the refrigerator door will not auto-
matically turn the lights on. The light switches must be manually pressed to activate the lights.
ºF/ºC
SELECTOR
Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature from Fahren-
heit to Celsius or from Celsius to Fahrenheit, press and hold the LIGHT key for 5 seconds.
Fig. 1
Fig. 2
It is normal for there to be a temperature variance of 1º-5º of the set temperature. This unit will not raise its
internal temperature if the ambient temperature where the unit is located is lower than the set temperature.
