background image

Safety Precautions 

APPLIANCE SAFETY 

Your safety and the safety of others are very important to us. 

This is the Safety Alert Symbol. This symbol alerts you to potential hazards that may result in 
serious injury. All safety messages will follow the Safety  Alert Symbol and either the words” 
DANGER” or “WARNING”.  

Danger means that failure to heed this safety statement may result 
in severe injury or death. 

Warning means that failure to heed this safety statement may result 
in extensive product dam-age, serious injury, or death.  

Caution means that failure to heed this safety statement may result 
in minor or moderate injury, or property or equipment damage.  

All safety messages will alert you to know what the potential hazard is, tell you how to reduce the

 

chance of 

injury, and let you know what can happen if the instructions are not followed.  

IMPORTANT SAFEGUIDES

Before the appliance is used, it must be properly positioned and installed as described in this 
manual, please read the manual carefully. To reduce the risk of fire, electrical shock or injury 
when using the appliance, follow basic precaution, including the following:  

Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do

 

not use

an extension cord.

Do not use if the power supply cord is damaged. If damaged, it must be replaced by a qualified electrician.

It is recommended that a separate circuit, serving only your appliance be provided. Use receptacles

 

that

cannot be turned off by a switch or pull chain.

Never clean appliance parts with flammable fluids or harsh chemicals. These fumes can create a fire

 

hazard

or explosion.

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of the appliance or

 

any

other appliance.

Before proceeding with cleaning and maintenance operations, make sure to unplug the appliance.

Do not connect or disconnect the electric plug with wet hands.

Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in

 

this

manual. All other servicing should be referred to a qualified technician.

This appliance is CFC- and HFC-free and contains small quantities of Isobutane (R134A) which is
environmentally friendly, but flammable. It does not damage the ozone layer, nor does it increase the
greenhouse effect. Care must be taken during transportation and setting up of the appliance that no parts of
the cooling system are damaged. Leaking coolant can ignite and may damage the eyes.

To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic 
precautions 

Summary of Contents for BOR-53024-SSW

















Reviews: