CANDACE - KB
LIST
L
R
(LEFT)
(RIGHT)
STEP 1
Begin assembly by attaching each headboard leg (2) & (3) to the bottom of the headboard cushion
(1) by aligning the hole and securing with 3 Allen Bolts (C) , 3 spring washer (F) , 3 flat washer
(G) per leg using L-key (J). (DO NOT FULLY TIGHTEN BOLTS FOR THIS STEP)
STEP 2
Attach each footboard legs (5) to the bottom of the footboard cushion (4) by inserting a dowel (E)
& securing with 1 Allen Bolt (D) per leg using L-key (J).
NOTE : AFTER A FEW DAYS , IT WILL HAVE ACCLIMATIZED TO THE ENVIRONMENT.
PLEASE TIGHTEN ALL HARDWARE. CHECK TIGHTNESS OD ALL SCREWS EVERY 6-8 WEEKS.
Make sure the cleat is
on outside edge
Do not fully tighten screws
until assembly is complete
and the bed is level
