1506RGB Stonewood Beveled Mirror
Assembly Instructions
1506RGB
— Page 3 — 01/15
Tools Required:
Phillips Screwdriver, Tape Measure, Pencil
You have the option of attaching your Mirror to the wall or to selected Dressers. To attach the Mirror
to a wall, follow steps 1-3. To attach the Mirror to a Dresser, follow steps 4-6.
1.
Determine where you want the bottom of your mirror to end and draw a faint pencil line on the
wall. Using a tape measure, measure up 32-3/4" from that line. Draw another faint line. The top
line is where you will attach the Mirror Wall Bracket (P). If you like, you may erase the faint
bottom pencil mark. See Figure 1.
2.
Locate two studs in the wall behind the space where you want to hang your Beveled Mirror. Affix
the Mirror Wall Bracket (P) into the studs with two #8 x 1-3/4" Pan Head Screws (K). If you
cannot locate two studs, purchase the proper wall attachment hardware for your type of wall and
secure the bracket. See Figure 2.
Fig. 1
Wall
32-3/4"
Fig. 2
Wall
P
K
x 1
x 2
P
K
