1113GACa 1113CAFa 1113FSTa McKenzie 4-Drawer Nightstand
Assembly Instructions
1113GACa_1113CAFa_1113FSTa — Page 3 — 11/19
Tool Required: Phillips Screwdriver, Pencil.
1. This piece of furniture includes a drawer interlock system allowing only one lower drawer to be
open at a time. This is a safety feature to reduce the risk of tip over. Do not defeat or remove the
drawer interlock system.
2. Place the unit at its final destination. Rotate the Small Adjustable Glides (P) on the bottoms of
the legs until the unit is level. See Figure 2.
3. If you need to remove your drawers, pull up on the left Drawer Release Lever while pushing
down on the right Drawer Release Lever and pull out the drawer. See Figures 3 and 3a. Note
where each drawer came from to make sure you place them back into their correct positions.
Fig. 3
Drawer Release Lever
Fig. 3a
Fig. 2
P
P
