2225AST Ellison Cal-King Panel Storage Bed
Assembly Instructions
This assembly requires two people.
2225AST
— Page 5 — 07/18
Tools Required
: Phillips screwdriver, 1/2" open end or box end wrench.
1.
Set aside part Trestle Rail (T) for use later in the assembly process. Use the notch and dowels
on Square End Support (Q) and Mitered End Support (P) as a guide attach to the Right Support
(S) using the Hex Bolts (ZC) and Washers (ZE) from the Headboard/Footboard Kit. See Figures
1 and 1a.
2.
Attach the assembly to the Left Support (R) Using Hex Bolts (ZC) and Washers (ZE). See
Figures 2 and 2a. Identify the Headboard end of the assembly and place near the final bed
location. See drawing below.
Fig. 2
R
Q
Q
ZE
ZC
x 3
x 3
P
Footboard
Headboard
Fig. 2a
ZE
ZC
Fig. 1
Q
Q
S
ZE
ZC
x 3
x 3
Fig. 1a
ZE
ZC
P
