1456AFGSPb; 1456AFCAFb Pacific Cal-King Storage Bed
Assembly Instructions
This assembly requires two people.
1456AFGSPb_1456AFCAFb
— Page 6 — 07/14
5.
Spread a thin film of glue in the dowel holes at one end of the top cap of the bed. Insert two
dowels (J) and gently tap with a rubber mallet. Quickly wipe away any excess glue. See Figures
5 and 5a.
6.
Position the Footboard (B) against the end of the pedestal assembly and insert the dowels (J)
into the oval holes in the top cap of the footboard. Place four 5/16" Washers (E) over four
5/16" x 2-1/4" Hex Bolts (D) and thread the washer/bolts through the predrilled holes in the
Pedestal Assembly and into the Footboard. Tighten the bolts with a 1/2" wrench.
See Figures 6, 6a and 6b.
Fig. 5
J
J
x 2
J
Fig. 5a
Top Cap
J
Fig. 6
Top Cap
J
D
E
x 4
x 4
J
Fig. 6a
D E
B
Fig. 6a
D E
J
