Whittier Wood Furniture 1326AFGAC Assembly Instructions Manual Download Page 8

Page: 8 / 8

Page 8 — 1326AFGAC_1326AFCAF — 06/10

15.

Fig. 14

E x 12

Place the Center Deckboard (R) as shown in Fig. 14 and secure with #8 x 1-1/4" Black Screws (E).

If at some time you need to adjust the center feet, remove the center deckboard, adjust the glides

and then reattach the deckboard.

14.

Positions are marked on the drawer bottoms. Carefully align drawer slides into the pedestal and

gently push them back to their original positions. Sleep well, and enjoy!

Summary of Contents for 1326AFGAC

Page 3: ...end or box end wrench and tape measure Fig 1 Fig 2 I I 79 Shipping Straps A R D C Remove the Trestles C and D and the Center Deckboard R from the back of the Headboard and remove the Foot Assemblies U from the Footboard as seen in Figures 1 and 1b and place them off to the side 1 Place both Pedestals I approximately 79 apart as shown in Figure 2 2 Fig 1a U B ...

Page 6: ...oard B to the Pedestal Assembly as in Figure 9 Align the brackets as shown in Figure 9a and slide the Pedestal Assembly down on to the Footboard B 9 Rotate the Glides W on the Foot Assemblies U so they just touch the floor Attach the Headboard A to the Pedestal Assembly as in the previous step NOTE Now use a wrench and tighten all of the bolts on the trestles 10 ...

Page 7: ...re them with 8 x 1 1 4 Black Screws E There should be a small gap between each deckboard 13 Fig 13 E x 24 P P 12 To make sure the bed is square measure the distance between opposing corners If one of the measurements is larger tap on a footboard leg until the measurement is equal See Figure 12 ...

Page 8: ...x 1 1 4 Black Screws E If at some time you need to adjust the center feet remove the center deckboard adjust the glides and then reattach the deckboard 14 Positions are marked on the drawer bottoms Carefully align drawer slides into the pedestal and gently push them back to their original positions Sleep well and enjoy ...