Rotate the Pedestal Assembly up-side down so the Plywood Deckboards are
on the floor. This step requires two people.
5.
6.
Fig. 6
Fig. 7
Fig. 7a
Fig. 6a
T-Nuts face out
G x 16
H x 16
C
C
C
C
D
D D
D
C
C
D D
T x 6
U
Page 5 — 1326AFGAC_1326AFCAF — 06/10
Position the remaining Trestles (C and D) on the Pedestal Assembly. Face the Trestles with
T-Nuts (D) toward the ends of the Assembly from the center as shown in Figure 6. Insert and
hand-tighten the 1/4" x 2-1/2" Hex Bolts (G) and Washers (H). See Figures 6 and 6a.
7.
On each inner pair of Trestles (C and D), place a Foot Assembly (U) between the two middle
trestles as shown in Figure 7. Attach each Trestle with three #8 x 2" Black Screws (T) as shown
in Figure 7a.
T
