1186RGB 9-Drawer Stonewood Dresser
Assembly Instructions
1186RGB — Page 4 — 10/15
Tool Required: Phillips Screwdriver, Pencil, and optional ½" wrench.
1.
Open the Top Center Drawer (D) and remove the foam packaging. Remove the Tray (L) from
the drawer and recycle the packaging. Return the Tray (L) to the drawer. See Figure 1.
2.
There is a secret storage area in the Top Center Drawer (D). To access this storage, open the
Small Lower Drawer (E). Reach in until you find the Hinged Drawer Stop (ZB) that is attached to
the bottom right side of the Top Center Drawer (D). Pull the Hinged Drawer Stop (ZB) forward
and then pull the top center drawer (D) out far enough so you can access the concealed storage
space. To close the drawer, just push it shut. See Figure 2.
L
Fig. 1
Fig. 1a
D
D
E
Fig. 2
D
ZB
