10
MAINTENANCE
Periodic maintenance should be scheduled and performed on your system every three months after your initial installation.
Requirements Prior to Maintenance:
Maintenance Checklist:
EVERY 3 MONTHS:
4
Check Filter. Filter housing may have an alarm to indicate a clogged filter.
EVERY 6 MONTHS:
4
Replace Filter as required.
4
Inspections:
• Inspect all hoses for cracks or kinks.
• Inspect all hose fittings for cracks or leaks.
• Inspect and tighten all bolts.
4
Clean external surfaces: (Use an environmentally friendly cleaning/degreasing fluid and warm water. Rinse completely before replacing.)
CAUTION!
Personal Protective Equipment (“PPE”) should be worn when installing and operating this system.
WARNING!
ALWAYS ensure the main power supply is first locked out and the system depressurized before any service
is performed on this system. NEVER connect or disconnect lines, change filter elements, or undertake any
service work when this system is running or energized. SEVERE injury or death may occur.
WARNING!
OilSafe DOES NOT recommend changing the type of fluid stored in a tank. Each system is custom-built
to customer specifications including the type of fluid stored. Contact your supplier if your fluid storage
needs change to remove the possibility of cross-contamination and incompatibility of system materials or
components with a new fluid.
Also be aware of any change in ambient room temperature in the new location. Ambient room temperature
should not be less than 60°F (15°C).
