TDI
Pr o
Owner ’s Gui de 5
1.
Remove all parts from the shipping carton and check assembly page to
make sure all parts are present.
2.
Install black rubber washers on fi ber clevis/lower rod, insert lower rod
onto loop ears. Use only nonmetallic washers, fi ber bolt, and fi ber thumb-
nut to secure loop/search coil to clevis/lower rod.
3.
Unlock “S” rod cam-lock and insert clevis/lower rod into curved “S”
rod so that stainless steel spring clip buttons line up and lock into one of
the adjustment holes in the curved “S” rod. Turn camlock to secure. The
second or third adjustment holes are suitable for average sized adults.
Individuals six feet or taller should use the fully extended position.
Individuals well over six feet tall should purchase the optional Tall Man
Rod accessory.
4.
Unravel search coil cable and wind the cable around the clevis and rod
assembly. First revolution over the top of the rod. Wind cable all the way
to the top of the curved “S” rod, (10-16) revolutions. Use the black cable
retainers, one near the search coil, and one near the top of the curved “S”
rod, to hold the loop cable in place.
5.
Unlock control box cam-lock and insert curved “S” rod so that stainless
steel spring clip buttons line up and lock into the rod on top the control
box. The “S” rod is designed to curve up towards the display. However,
those who prefer to sweep the search coil close to their feet may desire
to assemble the “S” rod to curve down towards the ground. Turn cam-lock
to secure. Plug search coil connector into control box (only fi ts one way),
screw lock ring fi nger tight to secure.
6.
Grip the instrument by the handle, with your arm in the elbow cup with
strap and sweep the search coil over the fl oor. If the instrument fi t feels
uncomfortable, readjust clevis/lower rod length with spring clip button and
cam-lock so that the loop/search coil can be held near the fl oor without
requiring bending at your waist (stooping over).
