![background image](http://html1.mh-extra.com/html/whites/goldmaster-gmx-sport/goldmaster-gmx-sport_owners-manual_976838007.webp)
6. Thread the velcro arm strap through the slots on the armcup. With
your arm in position, fold the strap over onto the velcro so that the
strap is loose enough to to pull your arm in and out of the armcup.
7. Grip the detector and sweep the search coil over the floor. If the fit feels
uncomfortable, adjust the position of the lower fiber rod. The ideal
position allows you to stand up straight and sweep the search coil over
the ground without stooping over.
8. Install eight “AA” batteries in the battery holder carefully noting the +
& - positions marked inside the battery holder. Insert the battery pack,
lining up the contacts. Tighten the battery seal.
Non-metallic
Washers
Control Pod
Camlock
Handgrip
Search Coil
Connector
Center Rod
Search Coil
Cable
Battery Holder with Cap
Velcro Armstrap
Control Buttons
Display
3