WHITEHALL MANUFACTURING
• P.O. Box 3527 • City of Industry, CA 91744-0527 U.S.A.
Phone 800-782-7706 • 626-968-6681 • Fax 626-855-4862 • Web: www.whitehallmfg.com
Operating & Maintenance Manual for Whitehall Electric Bottle Warmers
7
1 – You will need:
Sponge, cloth or non-abrasive cleaning pad.
•
Stainless steel cleaner, such as Sheila Shine
•
®
‚
or 3M Stainless Steel Cleaner & Polish. **
Synthetic abrasive cleaning pad,
•
such as Scotch-Brite. **
Soap, ammonia, detergent or mild disinfectant.
•
Household wax (powdercoated colored units only).
•
Mild acid such as white vinegar.**
•
** Use ONLY on stainless steel surfaces.
DO NOT use steel wool – it will rust and embed
•
in the stainless steel surface.
DO NOT use bleach, chlorinated solvents
•
or other chemicals – they will leave a residue
on your unit and will shorten the life of the
dispensing bottles.
CLEANING
2-Routine Cleaning (every 2 weeks or as needed).
Facing the front of the unit,
find the red power switch in the
lower, center or the unit. Turn
the power to the OFF position.
The light will go out.
Unplug the unit.
Wash* inside and outside with
a sponge, cloth or cleaning pad
using a mild soap solution.
For “hard water” spots and scale,
scrub the area** using a strong
solution of vinegar and water.
Let stand for 5 minutes.
Let the gel cool to room
temperature. Remove the
dispensing bottle(s).
Wipe* thoroughly with a
clean damp cloth.
.
*Always rub in the direction of the polish lines.
Dry* with a soft cloth
to avoid water marks.
3
2
1
4
5
6
!
CAUTION