WHITEHALL MANUFACTURING
• P.O. BOX 3527 • City of Industry, CA 91744-0527 U.S.A
Phone (800) 782-7706 • (626) 968-6681 • Fax (626) 855-4862 • Web: www.whitehallmfg.com
17
Instructions for Operation and Care of Best-Care WH3740
Determine the
number of seconds
per timing cycle
1 Push = 1 Second
x 1 =
sec
Fill in all the
Boxes below
1 Push = 5 Seconds
x 5 =
sec
ADD
1 Push = 20 Seconds
x 20 =
sec
ADD
Total timing cycle equals
seconds
EQUALS
—
Power down piezo button for 20 seconds.
PROGRAMING STEPS:
Ÿ
You are in the 20 sec timing mode, immediately push the button, 1
push equals 20 sec added to the total timing cycle.
Ÿ
LED flashes, then stays on.
Ÿ
While the LED is steady on, push button.
Ÿ
LED turns off.
Ÿ
Reconnect power.
Ÿ
You are in the 1 sec timing mode, immediately push the button, 1 push
equals 1 sec added to the total timing cycle.
Ÿ
You are in the 5 sec timing mode, immediately push the button, 1 push
equals 5 sec added to the total timing cycle.
Ÿ
Pause and wait for the LED to flash 2 times.
Ÿ
Pause and wait for the LED to flash 3 times.
NOTE: if you miss a step in the programming procedure, just power down
the button and start again from the first step.
Programming Instructions
(Flow Time Adjustment)
Programable Piezo Pushbutton
WORKSHEET
(FILL IN ALL BOXES, WHICH WILL SIMPLIFY THE PROGRAMMING PROCEDURE)
