Whitegoods Lighting Limited
Unit 19 Hiltongrove 14 Southgate Road London N1 3LY T +44 (0)20 7241 2032 F +44 (0)20 7241 2033 [email protected] www.whitegoods.com
important information
The installation of these products should only be carried out by a suitably qualified
electrician in accordance with the instructions supplied with the product. All
installation instructions can be downloaded from our website. We recommend that
they are included with construction issue drawings and specifications.
Ceiling void depths for recessed downlights and linear luminaires: The Ceiling void
depth should ideally be 25mm deeper than the overall height of the luminaire. When
a fire-hood and/or a remote emergency pack is to be used, the void depth and space
surrounding the luminaire will need to be increased.
The drawings, dimensions and finishes of the products in this catalogue and any
accompanying information are purely indicative. Great care is taken to provide up
to date information in this publication, however, due to a continuing programme of
design and development, we reserve the right to change these dimensions without
prior notice. Please check the website for most up to date information. If a dimension
is critical to the success of your project, please confirm it directly with the technical
department. Throughout this publication, cut-out sizes refer to the aperture
required when fittings are mounted in soft plasterboard. For fibrous tiles, timber,
metal tiles and cast-in construction, check dimensions on site, or ask for a sample.
Whitegoods reserves the right to discontinue any product in this publication at any
time without prior notice.
All photometric data supplied is taken from a standard production luminaire tested
under ideal laboratory conditions and may vary from data taken in alternative
conditions. All calculated light levels and/or lighting plots provided are offered for
guidance only. The customer must satisfy themselves that luminaires proposed are
suitable for the application intended in all performance and physical criteria.
All products are tested with stated lamp wattage. Incorrect lamp types and
wattages may effect efficiency, create glare and seriously overheat the luminaire.
Adequate ventilation and free air space around fittings (in accordance with the
installation instructions supplied with the product) will be necessary when used in
confined spaces where elevated temperatures will occur. All luminaires are designed
to operate in a maximum 30degree ambient temperature. Operating in ambient
temperatures above this can affect performance and the mechanical functionality of
the luminaire.
In order that we can continue to develop innovative quality products, we believe
it is of critical importance that we protect our ideas and visions. Therefore any
infringement of our intellectual property will be vigorously pursued.
We cannot offer refunds on Custom or Tailored products, Standard product may
be eligible for re-stocking within 3 months of original purchase date, subject to a
30% handling charge. All original packaging and documentation must be present and
goods must be in original condition.
Whitegoods will endeavor to fulfill all orders as quickly as possible and treat all
customers with the highest regard. For further information about Whitegoods
products and services, please visit www.whitegoods.com.
The Waste Electrical and Electronic Equipment Directive (WEEE Directive) is the
European Community directive 2002/96/EC on waste electrical and electronic
equipment, together with the RoHS Directive 2002/95/EC which became European
Law in February 2003, setting collection, recycling and recovery targets for all
types of electrical goods. This imposes responsibility for the disposal of waste
electrical and electronic equipment (WEEE) on the manufacturers of such
equipment. To meet these targets Whitegoods has become a member of Lumicom
to allow us to meet the current and future directives. For further information on
the WEEE directive please contact our offices.
WEEE Registration number is WEE/FG0362QY
Installation
Dimensions and specification
Performance
Temperature and physical environment
Intellectual property
Returns
Service
WEEE directive
