INSTALLATION SEQUENCE
In order to fit this luminaire, the correct sequence of assembly must be observed.
All measurements in mm unless stated otherwise
1. Remove the fitting from all of the packaging (note: handling this product may
require 2 people due to size and weight).
2. Slide spigot (supplied separately) into post and secure using screws provided
(Fig. 1).
3. Unscrew grommet of power connector and feed 2 core supply flex (Ø 9 - 12)
through (Fig. 2) (note: a terminal driver may be required to release connector
snap hooks to separate inner and outer connectors).
4. Strip Live / Neutral conductors in preparation for connection (Fig. 3).
5. Fix the Live / Neutral conductors of the 2 core supply flex to the power connector
using the securing screws (Fig. 4).
6. Fasten the inner connector to the outer connector using the click mechanism and
screw the grommet tight to secure the 2 core supply flex (Fig. 5).
7. Secure power connector to luminaire connector using the bayonet mechanism
(Fig. 6).
8. Place the luminaire head onto the spigot and secure both together using the
screws provided (Fig. 7).
Fig. 6
Power Connector
Luminaire Connector
[ Connector Assembly ]
Fig. 5
Ø 9-12
Grommet
Inner Connector
Outer Connector
[ Power Connector Assembly ]
6Nm (x4) max.
Fig. 7
Luminaire Head
Securing Screws
Post
[ Final Installation ]
Fig. 2
Ø 9-12
Inner Connector
Outer Connector
Grommet
[ Supply Flex Insertion ]
Fig. 4
Securing Screws
[ Supply Flex Connection ]
Fig. 3
8
30
Live / Neutral
[ Wiring Prep. ]
8Nm (x6) max.
Fig. 1
[ Spigot Assembly ]
Ø 60
120
