User Manual
Gate Opening and Closing
Safety
Maintenance and Failure
It lights for 0,5 seconds while the gate opens and fades for 2 seconds.
If 2 batteries are connected in the system, the light burning period will be
short when electricity is cut off whereas the fading period will be long.
While the gate closes, the light flashes in short intervals.
If 2 batteries are connected in the system, the light burning period will be short
when electricity is cut off whereas the fading period will be longer.
Ÿ
While gate closes or opens, if a hindrance is sensed, the warning lamp will keep lighting for 2 seconds.
Ÿ
For assigning the gate, while the gate moves towards opening, the warning lamp will flash quickly.
Ÿ
When the Automatic Closing or Single Open mode is active, the warning lamp will blink in 1 second intervals throughout the
determined automatic closing period.
Warning Lamp
Ÿ
To open the gate, press the button on the controller, assigned by the staff carrying out the installation.
Ÿ
If automatic opening is not active, re-press the same button to close the gate.
Ÿ
If installation staff has activated the automatic closing function, the gate will close automatically at the end of the
determined period.
Ÿ
To activate the automatic closing contact installation company.
Ÿ
The safety photocell on the gate will stop the gate to prevent any object to be stuck while gate is closing and re-open the
gate.
Ÿ
The warning lamp on the gate will flash to warn that the gate is moving. Do not approach the gate when the warning lamp
is flashing.
Ÿ
Clean the rail on which the gate is moving regularly.
Ÿ
Clean the glasses of safety photocells regularly.
Ÿ
If there is a problem regarding the operation of the gate, contact the authorised service.
0.3
sec.
3
sec.
0.3
sec.
3
sec.
The gate opens with the battery (Check the electricity of the system)
0.5
sec.
1
sec.
0.5
sec.
1
sec.
Gate Closes
0.3
sec.
2
sec.
0.3
sec.
2
sec.
Gate closes with battery (Check the electricity of the system)
0.5
sec.
2
sec.
0.5
sec.
2
sec.
The gate opens
25
