FAILURE
PROBABLE CAUSE
METHODS OF
ELIMINATION
The washing result is not
good.
Clothes exceeding the
maximum capacity have
been filled in your
machine.
Put the clothes in your
machine in a manner not
to exceed its maximum
capacity.
Your water may be hard.
Use the amount of
detergent according to the
declaration of the
detergent producer.
Distribution of the clothes
in your machine is not
well-balanced.
Spread the clothes inside
the machine in an orderly
and well-balanced manner
.
The water is drained from
the machine as soon as it
is filled.
The end of the water drain
hose is in a position too
low according to the
machine.
Place the water drain
hose in an appropriate
height.(**)
No water is seen in the
drum during washing.
No failure. The water is at
the lower part of the drum.
-
There are residues of
detergent on the clothes.
The pieces of some
detergents which do not
dissolve in water may stick
to your clothes as white
stains.
By setting your machine to
the “Rinse” program,
make an additional rinse
or eliminate the stains
after drying, with the help
of a brush.
There are grey stains on
the clothes.
These stains may be
caused by oil, cream or
ointment.
In the next washing
operation, use the
maximum detergent
amount declared by the
detergent producer.
(**) See the section concerning installation of your machine.
22
