HOW TO OPERATE TO BREW COFFEE.
STEP 1: Open the Water Tank Cover (C) and take out the Water Tank (B). Fill Water Tank with
appropriate fresh,cold water and replace it , and then close the Water Tank Cover. Alternatively, use
the other container to directly fill appropriate water into the Water Tank without taking it out, and
then go to the Step2. [NOTE: Always observes Water Tank (B) to make sure adequate water within it
during the brewing process.]
STEP 2: Plug Power Cord to the power and press down Power Button (N), then the Power Light (M)
and the Coffee Light (O) will come on simultaneously.
USING COFFEE POWDER:
STEP 3: Using coffee powder. Please note that there are two marks in the filter ,the below mark is
7g coffee Powder mark, the above one is 14g .Prepare the coffee powder and fit the appropriate
amount into the Filter (K). Tamp the coffee powder with Presser(L).
USING POD:
First place the gasket in the bottom of filter , then put the coffee pod.
The coffee light .(O) will go off once temperature reaches certain value, now
please insert the Valve cover(J) and Filter(k) into the Funnel Bracket (I) in the
order indicated (Fig.1).
12
Using 7g coffee powder
Using 14g coffee powder
1 cup
2 cups
notice_EX823_reso 28/11/05 0:55 Page 12
