U S E O F T H E A P P L I A N C E
U S E O F T H E A P P L I A N C E
• Before using for the first time, thoroughly wash all parts of the
coffee maker.
• Place the base (14) on a firm, level, heat resistant surface.
• For 3 cups of coffee : unscrew the upper vessel and lift 3-cups
filter insert (8) and the 6-cups filter funnel (9) out of the top of
lower vessel, then fill water into the lower vessel to the 3 cups
level. Place the 6-cups filter funnel (9) and the 3-cups filter insert
(8) in the top of the lower vessel, then fill coffee grounds in the 3-
cups filter insert.
• For 6 cups of coffee, fill water into the lower vessel to the 6 cups
level. Fill coffee grounds in the 6-cups filter funnel (9).
• Do not pack coffee tightly.
• Assemble the lower and upper vessels firmly. Place the
2 shaft as shown on the picture and turn. Place the body
onto the base (14). Plug the appliance and press “on”
knob. The unit will make the coffee flow onto the upper
vessel in just a few minutes.
• Once brewing cycle is complete, on/off light knob will turn off
and the coffee is ready.
• Unplug, pour the coffee and serve.
• If you want to boil coffee again, fill again with water and coffee,
then press the on/off light knob (12).
C L E A N I N G
C L E A N I N G
• Always remove the coffee maker body from the power base, then
unplug before attempting to clean the appliance.
• Open the lid, rinse the upper vessel under the tap or wash in
warm soapy water and rinse thoroughly.
• To clean the filters, remove the coffee grinds and rinse with clear
water.
• Clean the lower vessel (10) with a damp soft cloth and dry it.
• Do never immerse the power base (14) nor the lower vessel (10).
Simply wipe with a damp soft cloth and dry them before storing.
Never use harsh or abrasive cleaner.
10
Notice FA 822.1 3/04/07 16:34 Page 10
