FOR DOUBLE CUPS OF THE BREW
- The machine is under “coffee” mode when the liquid crystal “
” icon is displayed;
- Place 2 cups under the dispensing head. (Note: The height for this head is adjustable up and down
with your hand as per the mark on the machine),.
- Press the “double cups” key. The “double cups” icon is appeared.
FOR POWDER COFFEE :
- The machine is under “coffee” mode when the liquid crystal (
) icon is displayed;
- Select powder use by pressing (
/
)selection key until (
) icon appears.
- Fill the coffee powder tank with the desired powder quantity.
- Place 1 or 2 cups under the dispensing head and press the (
) or (
) key.
TEMPERATURE KEY :
- The machine must be at « coffee mode » to set temperature.
Press the (
) and three layers of liquid crystal temperature icons are glowing from low to high to
represent low temperature, medium temperature and high temperature.
The default is medium temperature.
SELF-CLEANING FUNCTION :
- The machine automatically rinse after each completion with brewing up to 10 cups.
- The (
) icon appears.
- The machine can be transferred into “coffee” mode only after the rinse is completed.
DECALING FUNCTION :
- The (
) icon and “rinse” icon are alternately blinking when the brewing coffee volume or used
water have reached to a certain quantity, which reminds you that a decaling operation is needed.
- At this time, you may continue to use the machine. The (
) and (
) icons could disappear
after continuing to brew another 10 cups without descaling.
PREPARING FOR HOT WATER :
- The machine is under “coffee” mode. The (
) icon is displayed.
- Place the container under the steam nozzle.
- Turn on “steam” knob, (counter-clockwise from “0” to “steam position” ).
- Immediately, the hot water flows out from the nozzle.
- Turn off “steam” knob, (clockwise from “steam position” to “0” ) to stop the flow.
12
notice_EX830 21/03/06 17:21 Page 12
