C O N T I N U O U S S T E A M F U N C T I O N ( 1 2 )
C O N T I N U O U S S T E A M F U N C T I O N ( 1 2 )
• This function is obtained by pressing the continuous steam delivery button (11) and locking
button (12).
• To stop steam output, unlock button (12).
• The appliance can also generate steam in vertical position.
R E F L L I N G T H E I R O N W I T H WAT E R D U R I N G I R O N I N G
R E F L L I N G T H E I R O N W I T H WAT E R D U R I N G I R O N I N G
• Discharge any residual steam by pressing the steam output button (11) on the iron.
• Unplug.
• Let the appliance cool down a few minutes.
• Slowly unscrew the boiler cap (2) and fill the tank with water.
• Replace the cap.
• The appliance is ready to be used again.
D RY I R O N I N G
D RY I R O N I N G
• Set the thermostat (9) on desired temperature.
• Plug in.
• Put button (6) on
.
• Indicator (8) on the iron will light. It will light on and off during ironing for best regulation of
temperature.
D E S C A L I N G
D E S C A L I N G
The appliance has to be descaled every 1 to 3 monthes, according to hardness of used
water.
• First check there is no steam remaining in the boiler. If so, press the steam button to
eliminate steam.
• Unplug the appliance.
• Wait for the appliance to be completely cooled.
• Unscrew the cap.
• Empty the boiler above the sink or a container.
• Use a special descaling product, according to the using tips. Let it operate for 4 hours.
• Then empty the boiler and rinse 4 times before a next use.
CAUTION : never use the appliance with something else that water in the tank !
Do not use detergents.
14
Notice DB 741:Notice DB 713 10/12/09 9:16 Page 14
