2. INSTALL DUST CUP ON THE BODY
- Pull the dust cup bottom back to the dust cup until the button be locked.
- Put the dust cup onto the body case properly.
- Push on the dust cup to fix with body.
3. CHANGE OR CLEANING THE EXHAUST HEPA FILTERS
A - HEPA FILTER
Push the dust cup release button, handing the dust cup
handle to rear side, take off the dust cup from the
vacuum cleaner. Draw out the inlet sponge and HEPA fil-
ter set (Note: Please draw out the whole set with case
box).
Pull up the knob of the filter frame, and pull out the sponge filter and HEPA filter from the case box.
Cleaning the Sponge and HEPA filter by soft brush or rinse it in lukewarm water and dry them
completely before use again. All the filters are washable. ( we recommend you to clean the filters
when feeling the suction power becoming weak.)
14
Notice_AT 2127:Notice_kit viande 9/12/09 12:14 Page 14
