WhitakerAudio J C Whitaker 20 W Stereo Audio Amplifier, Manual

Page: 183 / 194

183
Cable Assembly Procedure
– Slide the housing for the female connector on to the cable. Be sure to properly orient the
housing with respect to the connector.
Using an ohmmeter, identify the black wire inserted in the pin #1 position on the male
connector. This wire should be connected to pin #1 on the female connector. For the white wire
pair, the green wire pair, and the blue wire pare, an exact match between the connectors is not
necessary.
– Insert the female connectors into a matching housing as follows:
• Black wire to pin #1
• White wire to pin #2
• White wire to pin #3
• Red wire to pin #4
• Green wire to pin #5
• Green wire to pin #6
• Blue wire to pin #7
• Blue wire to pin #8
• Black wire to pin #9
– Process (heat) the tubing closest to the connector socket. Caution: do not use too much
heat as it can melt the sleeving.
– Assemble the connector by screwing the housing onto the connector body. Install and
secure the cable clamp.
The connecting cable has been completed and is ready for use. The finished cable is shown in
Figure 1.1.