background image

21

FCC AND IC INFORMATION

RF warning statement:

The device has been evaluated to meet general RF exposure 
requirement. To maintain compliance with FCC's RF exposure 
guidelines, this equipment should be installed and operated with a 
minimum distance of 20cm between the radiator and your body.

FCC ID : HSXBU01M / HSXBU01C 

IC Warning:

This device complies with Industry Canada licence-exempt RSS 
standard(s). Operation is subject to the following two conditions: 
(1) this device may not cause interference, and (2) this device must 
accept any interference, including interference that may cause 
undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada 
applicables aux appareils radio exempts de licence. L'exploitation 
est autorisée aux deux conditions suivantes : (1) l'appareil ne doit 
pas produire de brouillage, et (2) l'utilisateur de l'appareil doit 
accepter tout brouillage radioélectrique subi, même si le brouillage 
est susceptible d'en compromettre le fonctionnement.

RF warning statement:

The device has been evaluated to meet general RF exposure 
requirement. To maintain compliance with RSS-102 — Radio 
Frequency (RF) Exposure guidelines, this equipment should be 
installed and operated with a minimum distance of 20cm between 
the radiator and your body. Le dispositif de a été évalués à répondre 
général rf exposition exigence. Pour maintenir la conformité avec 
les directives d'exposition du RSS-102 - Radio Fréquence (RF), ce 
matériel doit être installé et exploité à une distance minimale de 20 
cm entre le radiateur et votre corps.

IC:1698A-BU01M / 1698A-BU01C

Summary of Contents for WBU-1000





























Reviews: