24
OPERATION
Stay Alert Feature
The Stay Alert Feature is designed to test a driver’s alertness.
To engage (when the unit is not alarming):
• Press and hold the City button for approximately 2 seconds.
Release the button during or immediately after the alert is
given.
Display shows:
Within 30-60 seconds, two beeps are sounded; to show alertness,
the driver must press either the City, Dark or Quiet buttons within
3-5 seconds. If a button is pressed within 3-5 seconds, the cycle
is repeated. Before unit alerts, press PWR to exit this feature. If a
button is not pressed within 3-5 seconds, an alarm sounds.
Display shows:
• Press the DARK button to exit during the Get Rest message.
WARNING!!!
Stay Alert is NOT intended as a substitute for
adequate rest. You should NOT operate a vehicle if you are
drowsy. During extended periods of vehicle operation, you
should take frequent breaks. Improper reliance on the Stay Alert
feature may result in vehicle damage, personal injury or death.
NEVER OPERATE A VEHICLE IF YOU ARE DROWSY.
