Page 2 | 1-800-343-9463
CWSK.PS4000.B
082015
WARRANTY REGISTRATION
In order to activate the warranty of your system, the Verification and Operational
Documentation must be completed by the certified refrigeration technician
installing your system and submitted via mail, fax or e-mail.
Mail to:
WhisperKOOL
ATTN: Warranty Registration
1738 E. Alpine Avenue
Stockton, CA 95205-2505
USA
Fax to:
209-466-4606
Scan and e-mail to:
OR
OR
INTRODUCTION
Customer Service
Thank you for purchasing a WhisperKOOL Cold Weather Start Kit. We strive to provide the highest quality products and
the best possible customer service. If you have any questions about your system, please call us at 1-800-343-9463 or
visit WhisperKOOL.com.
Using the Manual
This Installation Manual is intended to provide detailed instructions for the installation of the Cold Weather Start Kit on
the Platinum Split 4000 cooling system. In order to ensure the proper longevity of your cooling unit, the equipment
should be installed as outlined in this Installation Manual. It is also vital to establish a proper care and maintenance
schedule. Please read and review this Installation Manual carefully and keep it for future reference.
What is a Cold Weather Start Kit?
The Cold Weather Start Kit is designed to ensure that your cooling system will start in low ambient temperature. The
Cold Weather Start Kit uses temperature controlled heaters on the receiver, in conjunction with an electronic bypass,
to maintain a pressure inside the system high enough for proper operation.
How Does the Cold Weather Start Kit Work?
The Cold Weather Start Kit provides heat to specific components in the condensing unit for proper operation when
the condensing unit is located in environments where temperatures drop below freezing. The Cold Weather Start Kit
comes equipped with sensors to enable an ideal temperature boost every time.
For the equipment warranty to be valid, WhisperKOOL requires that the installation is performed by a certified HVAC-R technician
(NATE certified technician is recommended) per the specifications outlined in this Technician’s Manual. The technician shall be
required to be equipped with the proper tools of the trade including: R-134a, brazing equipment, dry nitrogen, an accurate
manifold gauge set (digital preferred), plus a 4 valve manifold set for evacuation, digital micron gauge, digital scale, deep vacuum
pump and accurate digital thermometers. Without the proper equipment, a professional job cannot be accomplished. Evidence of
the certified tech’s NATE# or other certification is required.
