Fitting Kit
EN
K866W
Fitment
●
Clamps directly to edge of roof under the
doors
●
Please check the rear of this manual for
information relating specifically to your
vehicle.
●
Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 1/2") (unless otherwise stated).
●
Adjust the legs on the crossbar so that they
are positioned equally from the ends of the
crossbar, and the clamps engage firmly on
the body work of the vehicle.
●
Place washer onto the capscrew.
●
Place clamp over the mounting hole
●
Attach capscrew with the Hex Key. Do not
fully tighten.
●
Leave loose until both sides have had the
screw fitted.
8
