Whispbar K797W, Fitting Instructions Manual

Page: 8 / 84

Fitting Kit
EN
K797W
Fitment
●
Clamps directly to edge of roof under the
doors
●
Please check the rear of this manual for
information relating specifically to your
vehicle.
●
Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 1/2") (unless otherwise stated).
●
Adjust the legs on the crossbar so that they
are positioned equally from the ends of the
crossbar, and the clamps engage firmly on
the body work of the vehicle.
●
Tighten adjusting screw to 3 Nm (2.2 ft lb)
hand tight.
8