Fitting Kit
EN
K719W
●
Fit rubber pad (supplied with crossbar) to
foot.
●
Make sure the pad fits into the holes
underneath the foot.
●
Foot to sit in position shown.
●
Please check the front of this manual for
information relating specifically to your
vehicle.
●
Locate ditch mouldings on roof.
●
Position the permanent mount block so the
inner edge of the block is on the outer edge
of the ditch channel.
●
Apply masking tape to vehicle roof in all
four positions.
●
Make sure there is no interference between
what you intend to carry with aerials,
sunroof or tailgate.
7
