manualshive.com logo in svg

Whirlpool WWCR-9230, User Manual, Page: 9 / 12

Share
Download
Whirlpool WWCR-9230 User Manual Download Page 9

GB 9

Description of failure indications

Failure

indication

lights up

Description

Causes

Solutions

“Water tap closed”

Appliance has no or insufficient water supply. The “Start/Pause” light blinks.
Check whether:
• Water tap is fully open and water supply pressure is sufficient.
• Kinks are present in the water inlet hose.
• Mesh filter of water supply hose is blocked (see “Care And Maintenance”.
• The water hose is frozen up.
• The safety valve inspection window of your water supply hose is red (provided 

your appliance has a water supply hose as shown on picture “D” - see previous 
chapter “Care And Maintenance”); replace the hose by a new one available 
through our After-Sales Service or your specialist dealer.

After problem has been removed, restart programme by pressing “Start/Pause”. 
If the fault occurs again, contact our After-Sales Service (see next chapter).

“Clean pump”

Waste water is not pumped out. The appliance stops in the corresponding 
programme step; unplug it and check whether:
• Kinks are present in the drain hose, or the hose is blocked for another reason.
• Filter or pump is blocked (see chapter “Draining Residual Water/Cleaning The 

Filter”; make sure the water has cooled before draining the appliance).

• The drain hose is frozen up.
After problem has been removed, push the “Reset” button for at least 3 seconds; 
afterwards restart the desired programme. If the fault occurs again, contact our 
After-Sales-Service (see next chapter).

30106390GB.fm  Page 9  Tuesday, February 22, 2011  2:56 PM

Black process 45.0° 130.0 LPI 

www.devicemanuals.eu/

blocked (see “Care And Maintenance”.

your water supply hose is red (provided 

y hose as shown on picture “D” - see previous 

ace the hose by a new one available 

or your specialist dealer.

After problem has been removed, restart programme by pressing 

After-Sales Service (see next chapter).

www.devicemanuals.eu/

Waste water is not pumped out. The appliance stops in the corresponding 
programme step; unplug it and check whether:

Kinks are present in the drain hose, or the hose is blocked for another reason.
Filter or pump is blocked (see chapter 

www.devicemanuals.eu/

“Draining Residual 

make sure the water has cooled 

The drain hose is frozen up.

After problem has been removed, push th
afterwards restart the desired programme. 
After-Sales-Service (see next chapter).

www.devicemanuals.eu/

www.devicemanuals.eu/

Summary of Contents for WWCR-9230













Reviews:

No comments