COMPONENT ACCESS
Multi-Door Freestanding Refrigerator
n
4-7
Accessing Refrigerator Compartment Components (Continued)
Water Reservoir and Valve Assembly
13.
Remove three, 1/4" (6.4 mm) hex head screws.
14.
Disconnect ice maker fill tube from the isolation valve
connected to the filter head.
15.
Disconnect electrical connections to water reservoir and
valve assembly. Disconnect dispenser and ice maker fill tubes.
16.
Drop the front of the housing and disengage the 3 rear tabs
from the three slots in the top of the refrigerator cabinet.
17.
Disconnect 1/4" (6.4 mm) reservoir water tube from dual
water valve and cut the five nylon wire ties to remove
reservoir.
NOTE: Reservoir wire ties do not need to be removed to
access remaining water reservoir and valve assembly
components.
18.
Lift dual water valve to remove.
A. Dispenser fill tube
B. Ice Maker fill tube
A
B
A
A
A
A
C
D
B
A
A. Wire ties
B. Reservoir
C. 1/4" (6.4 mm) reservoir water tube
D. Dual water valve
Summary of Contents for WRV976FDEM
